Biesse STREAM B1 7.5 Edge Banding Machine 2015 – Serial No. 1000006195 – Wrocław

Biesse STREAM B1 7.5 Automatic Edge Banding Machine – 2015 – Serial No.***5

We offer a Biesse STREAM B1 7.5 single-sided automatic edge banding machine from 2015, manufactured by BIESSE S.p.A. (Pesaro, Italy). This is a complete, multi-station industrial edgebander with a full processing line: pre-milling, glue application, end trimming, profile milling, corner rounding, scraping and polishing. The machine is equipped with a steel sound-insulated enclosure with pneumatically lifted hoods and an overhead dust extraction manifold with flexible drops for each aggregate. Control is provided by a Biesse industrial computer panel on a swivel arm at the machine infeed, with graphical aggregate visualization and a physical PC keyboard.

Verified Technical Specifications (from Manufacturer's Nameplate)

• Manufacturer: BIESSE S.p.A., Via della Meccanica 16, 61122 Pesaro, Italy
• Model / Type: STREAM B1 7.5
• Serial number (Matricola):***5
• Year of manufacture: 2015
• Total weight: 5,840 kg
• Power supply: 380 V AC, 3 / N / PE, 50 Hz
• Rated current: 57 A
• Installed power: 30 kW
• Prospective short-circuit current: 10 kA RMS Sym
• Required pneumatic pressure: 7 bar
• Extraction air flow velocity: 30 m/s
• Electrical diagram number: N5550N0580
• CE marking (EU directives compliance)

Processing Line – Aggregates

• Pre-milling aggregate – edge preparation before glue application
• Glue zone with melting pot, edge roll guillotine and pressure rollers, plus anti-adhesive spray installation with 2 dosing containers with individual pneumatic regulation
• End trimming unit – front and rear circular saws trimming edge overhang
• Roughing and profile milling units, top/bottom, driven by high-speed HSD electrospindles (model ISM 137) with chip extraction hoses
• Corner rounding aggregate – profiling and rounding edge corners at panel joints
• Scraping units – profile scraper R plus flat scraper removing excess glue line from the panel surface
• Polishing unit – final buffing brushes with electric motors for cleaning and glossing the finished edge

Feed, Pneumatics and Electrical Installation

• Lower caterpillar feed conveyor with motorized drive at the infeed and upper roller pressure beam
• Sectional pneumatic regulation panels with pointer gauges: section pressures 1.1–5.0 bar depending on station (4-gauge and 3-gauge panels)
• Central 8-position distributor with pressure settings annotated per feed speed
• Industrial multi-pin connectors (Harting-type) connecting mobile motor assemblies to the control cabinet

The machine is available for inspection in Wrocław, Poland. Price 28,000 EUR net. All technical data verified from the original manufacturer's nameplate.

Contact us for details, additional photos or to arrange a viewing.