Used Raster HR 60 SL-4S stamping press 60t with decoiler and straightener line - Katowice

Raster HR 60 SL-4S stamping press with decoiler and straightener line

Used eccentric stamping press Raster HR 60 SL-4S with a force of 600 kN (60 Mp), offered complete with an automatic feed line: decoiler, loop controls, straightener and parts container, all installed inside a soundproof enclosure. According to the seller, the machine has been serviced and remains in continuous operation.

Press - technical data

• Press force: 60 Mp / 600 kN
• Connecting rods: 2
• Table - slide distance: 300/350 mm
• Table - slide guide distance: 120/170 mm
• Clamping surface of table: 830 x 830 mm
• Opening in table: 550 x 120 mm
• Slide surface: 710 x 360 mm
• Slide stroke (small/large): 10 - 50 mm
• Max. slide adjustment: 50 mm
• Centring hole: 40 mm, 30 mm deep
• T-slots DIN 650 18H11: 6 pcs (table), 4 pcs (slide)
• Speed: 80 - 400 rpm
• Safety device: electropneumatic clutch with spring-loaded brake
• Punching capacity: 1500 mm2 at K = 340 kg/mm2

Feed line - layout

• Decoiler: 1500 x 1300 mm
• Loop control before straightener: 1500 x 1300 mm
• Straightener: 970 x 610 mm (documentation DIMECO ALIPRESSE)
• Loop control before press: 600 x 600 mm
• Press: 1350 x 1500 mm
• Parts container: 900 x 400 mm
• Control panel: 500 x 500 mm; control cabinet: 500 x 500 mm

Condition

The press has been serviced and is in continuous operation (seller information). Year of manufacture and serial number are not filled in on the manufacturer's machine card and remain to be confirmed. The soundproof enclosure is included in the scope of delivery.

Price: 28 000 EUR EXW Katowice. Viewing possible after prior arrangement. Contact: Marcin Bialczyk, +48 503 75 55 81, ***@****.

FAQ

What is included in the offer?
The offer covers the Raster HR 60 SL-4S eccentric stamping press (600 kN) together with the complete feed line: decoiler, two loop controls, straightener and parts container, installed in a soundproof enclosure.

What is the pressing force of the Raster HR 60 SL-4S?
The nominal press force is 60 Mp, which equals 600 kN. The punching capacity stated on the machine card is 1500 mm2 at a material strength of K = 340 kg/mm2.

Is the machine operational?
According to the seller, the press has been serviced and is in continuous operation. A live demonstration is possible at the machine's location in Katowice after prior arrangement.

What are the table dimensions of the press?
The clamping surface of the table measures 830 x 830 mm with a 550 x 120 mm opening; the slide surface measures 710 x 360 mm.

Where is the machine located and how much does it cost?
The line is located in Katowice, Poland. The asking price is 28 000 EUR EXW.