Used DAVI PROMAU MCB 3025 4-Roll Hydraulic Plate Bending Roll 1999 – Serial No. 0540058 – Świdwin

Used DAVI PROMAU MCB 3025 4-Roll Hydraulic Plate Bending Roll 1999 – Serial No. 0540058

A heavy-duty 4-roll hydraulic plate bending roll from the renowned Italian manufacturer PROMAU S.r.l. (DAVI brand), model MCB 3025. Designed for rolling steel plates up to 25 mm thick and 3000 mm wide into cylinders and cones, this machine is a proven workhorse for boilerwork, tank manufacturing and heavy steel fabrication. Located in Świdwin, West Pomeranian Voivodeship, Poland. Price on request.

Verified Technical Specifications

• Manufacturer: PROMAU S.r.l., Via Civinelli, Cesena, Italy (DAVI brand)
• Model: MCB 3025 (MCB series, 4-roll design)
• Serial Number: 0540058 (verified from the manufacturer's nameplate)
• Year of Manufacture: 1999 (11/1999 per nameplate)
• Max Plate Width: 3000 mm
• Max Plate Thickness (carbon/black steel): 25 mm
• Electrical Supply: 380–400 V, 50 Hz, three-phase
• Control: Manual / hydraulic lever control from external column-mounted control desk
• Drive: Full hydraulic (hydraulic motors and cylinders)
• Certification: CE marking (per nameplate)
• Estimated Weight: approx. 16 000 – 20 000 kg

Equipment

• Hydraulically raised top support arm preventing deformation of large-diameter, thin-walled cylinders
• Hydraulic side supports assisting plate infeed and outfeed through the rolls
• External column-mounted control desk with lever distributors and push-buttons for roll and support manoeuvring

Condition

The machine is operational and ready for work, adequate for its age and heavy-duty service history. Important notes for the buyer:

• The safety limit switch on the operator's safety wire has been removed – it must be reinstalled and certified before the machine is put into service (BHP requirement).
• Visible hydraulic oil leaks – seal replacement and an oil/filter service are recommended.
• No technical documentation (DTR) is included.

Location & Loading

The machine stands at ground level in Świdwin, Poland. Loading requires a heavy forklift (min. 16 t capacity) or a crane/HDS. The machine can be inspected on site by arrangement.

Contact

For price, inspection and transport details contact Marcin Białczyk, WeSellMachines: +48 503 75 55 81, ***@****.