Used POTISJE PA Heavy-Duty Engine Lathe 2000 mm Between Centers – Świdwin

Used POTISJE PA Heavy-Duty Engine Lathe – 2000 mm Between Centers

A heavy-duty conventional engine lathe by POTISJE Ada (former Yugoslavia / Serbia), PA series – machine marking PDT 15 JE. Built for machining large shafts, pipes and discs with a massive cast-iron bed, 2000 mm turning length between centers and a 140 mm spindle bore. Located in Świdwin, West Pomeranian Voivodeship, Poland. Price on request.

Technical Specifications (per seller information)

• Manufacturer: POTISJE Ada (former Yugoslavia / Serbia)
• Model: PA series, machine marking PDT 15 JE
• Turning Length Between Centers: 2000 mm
• Spindle Bore (through-hole): 140 mm
• Max Turning Diameter (over bed / over cross slide): 960 mm
• Drive & Feeds: Mechanical gearbox, Norton-type feed box, manual control from the apron
• Estimated Weight: approx. 5 500 – 7 000 kg

Equipment

• 3 chucks of various diameters (including a self-centering chuck and a 4-jaw faceplate)
• Massive tailstock with manually / mechanically extended quill
• Note: no fixed/travelling steady rest; no change wheels for the thread-cutting gearbox (limits non-standard thread cutting)

Condition

According to the seller, the lathe worked until the end of its service without drive-system failures. Important notes:

• Oil leaks from the headstock / feed gearbox – seal and oil service recommended.
• Bed ways and apron clearances could not be measured without a trial run and dial-indicator verification.
• No technical documentation (DTR) is included.
• Year of manufacture unknown – to be confirmed.

Location & Loading

The machine stands at ground level in Świdwin, Poland. Loading is possible with a standard 6–8 t forklift. Inspection on site by arrangement.

Contact

For price, inspection and transport details contact Marcin Białczyk, WeSellMachines: +48 503 75 55 81, ***@****.