Used Schroeder machines and equipment

Schroeder (Gebr. Schroeder Maschinenfabrik, Warendorf, Germany) is a family-run manufacturer of double-end tenoners and specialised machinery for parquet production, including top-layer lamella splitting saws and parquet profiling lines. On the used machinery market, Schroeder double-end tenoners are bought by window, door, parquet and frame producers who need to machine both ends of a workpiece in a single pass. Verified model names from the used market include the Schroeder T27, T2701 and the PAKUE F series.

Brand overview and history

Gebr. Schroeder Maschinenfabrik GmbH & Co. KG is based at Beckumer Strasse in Warendorf, Germany. The company is a family-run machine factory now in its third generation — Hans-Bernd Schroeder, grandson of company founder Hans Schroeder, entered the business in 1996. Schroeder concentrated on a narrow, technically demanding segment: double-end tenoners and complete machinery for parquet production. Both product families are built at the Warendorf site and sold to woodworking companies in Germany and export markets.

Double-end tenoners machine both ends of a workpiece — window and door frames, parquet elements, frame components — in one cycle: cross-cutting to length, tenoning, slotting and profiling on both ends simultaneously. This machine type exists because identical machining of both ends in a single clamping is faster and more accurate than two separate operations. Schroeder presented its then-new PAKUE F double-end tenoner generation at the LIGNA trade fair in 1999, and the PAKUE F series remains the model name most associated with the brand on the used market.

Alongside double-end tenoners, Schroeder builds machinery for parquet production. Documented machines include the S-4 top-layer lamella splitting saw, presented at LIGNA 1999, and parquet profiling lines such as the DUO 12/12 F, used for profiling lamellas and parquet strips. This makes Schroeder equipment relevant for two buyer groups on the used market: window and frame producers looking for double-end tenoners, and parquet manufacturers looking for splitting, profiling and tenoning equipment.

Used Schroeder machines come mostly from window factories and parquet plants that are closing, resizing or modernising their lines. Because these machines ran specialised production, they often remain mechanically complete, with their original saw and spindle units. Buyers are typically window and door manufacturers, parquet producers, and joineries with in-house frame production. The decisive cost factors on the used market are spindle and bearing condition, alignment between the two machining ends, and the state of the electrical controls on older generations.

Main machine types from Schroeder

Double-end tenoners

Double-sided tenoning and slotting machines for window production, frame wood processing and parquet elements. Documented used configurations of the older T27 type show working widths up to 3,400 mm per side, with a saw unit and profiling spindles on both ends of the machine — for example a 3 kW saw and 9.2 kW spindles with 250 mm spindle length. The PAKUE F series is the newer double-end tenoner generation developed by Schroeder in the late 1990s.

Parquet production machinery

Machines for parquet manufacturers: top-layer lamella splitting saws (S-4), profiling lines for lamellas and parquet strips (DUO 12/12 F), and related special machines for strip parquet, mosaic parquet and multi-layer parquet production.

Popular Schroeder models on the used market

• PAKUE F series — Schroeder's double-end tenoner generation developed in the late 1990s and presented at LIGNA 1999; the model name most associated with the brand in parquet and frame production.
• T2701 — double-sided tenoning and slotting machine for window production and frame wood processing; the most frequently listed used Schroeder model of the older generation.
• T27 — double-end tenoner for window and frame production; documented used machines from this type offer working widths up to 3,400 mm per side with saw and spindle equipment on both ends.
• S-4 — top-layer lamella splitting saw for parquet production, presented by Schroeder at LIGNA 1999.
• DUO 12/12 F — parquet profiling line for lamellas and parquet strips.

Buying used Schroeder machines – what to check

• Check spindle and saw bearings for play and noise; these are the main wear components on double-end tenoners.
• Verify that the two machining ends are aligned with each other — misalignment between the two sides produces out-of-square frames and parquet elements.
• Inspect feed chains, rollers and pusher systems; worn feed elements show as length variation between identical parts.
• Test all tenoning, slotting and profiling units with your own profile if possible, not only an idle run.
• On parquet machinery, check splitting saws and profiling spindles for wear, and verify that tool holders and tool sets are included.
• Check the electrical cabinet and control system; on older machines, plan for control upgrades where parts are no longer available.
• Confirm machine dimensions and foundation requirements — double-end tenoners are long machines and need adequate floor space and alignment during installation.

FAQ: used Schroeder machines

What is a Schroeder double-end tenoner used for?

A Schroeder double-end tenoner machines both ends of a workpiece — typically a window frame, door frame, parquet element or similar linear component — in a single pass. It combines cross-cutting, tenoning, slotting and profiling operations on both ends, which is why window, parquet and frame producers buy these machines used instead of running several standalone operations.

Who makes Schroeder woodworking machines?

Schroeder woodworking machines are built by Gebr. Schroeder Maschinenfabrik GmbH & Co. KG, a family-run machine factory based in Warendorf, Germany, now in its third generation. The company specialises in double-end tenoners and machinery for parquet production.

Which Schroeder models appear on the used market?

The most common listings are the T2701 and T27 double-end tenoners of the older generation, and the PAKUE F series developed in the late 1990s. From the parquet range, the S-4 lamella splitting saw and DUO 12/12 F profiling line appear occasionally. Used machines are offered by woodworking machinery dealers across Europe.

What should I check before buying a used Schroeder double-end tenoner?

Focus on spindle and saw bearings, alignment of the two machining ends, feed system condition, and a production test with your own profiles. Also check the electrical controls and confirm that machine length and foundation requirements fit your workshop.

Are spare parts available for Schroeder machines?

Gebr. Schroeder is an active manufacturer in Warendorf, so parts for the PAKUE F generation and later machines are generally available through the company. For the older T27/T2701 generation, bearings, belts and standard components are obtainable from industrial suppliers, while machine-specific parts should be confirmed through the seller or specialised used-machinery dealers before purchase.