Multirip saw CML J350

Year of manufacture 2004

1. Feed
The conveyor belt moves on hardened steel guides and is driven by a motoreducer with an inverter.

2. Saws
Mounted directly on the shaft.

3. A set of clamps
Automatic lifting with 6 independent rollers and a wooden foot fixed between the saw blades.

4. Control panel.
5. Support with 15MW laser.
6. The machine internally covered with soundproof material.
7. Steel spacers for adjusting the mutual distance between the saw blades.
8. Aluminum spacers for adjusting the mutual distance between the saw blades.
9. Security protection.
Anti-pull system composed of steel combs: three upper combs (one acting as anti-pull comb, two anti-return combs) and one lower one.

technical dates:

- cutting height max 120 mm
- useful cutting width 320 mm
- belt width 350 mm
- lumber passage width 650 mm
- length min. elements 600 mm
- saw blade diameter: min/max 250/370 mm
- hole 60 2 grooves 20 x 6 mm
- 4 independent pressure rollers with a width of 370 mm
- feed of the conveyor belt with smooth regulation 1.5 KW / HP 2 0-40 m / s
- upper dust extraction hood, diameter 250 mm
speed 30m/1'
load capacity 5300 m3/h
- motor lifting the set of clamps 0.75 KW
Ddyxca8
- manual lubrication pump
- net weight 1600 kg
- dimensions: cm L 191 x W 149 x H 167
- motor 37 KW / 50 HP V 400/3/50Hz

Very good technical condition.

Full technical documentation.

In addition, a set of specialist saw blades for sawn timber 20 pcs. (sharpened, almost new).

Feeding and receiving table (each 4.5 meters long).