BIEGEMASCHINE FELDER G300

FELDER G300: Professional Edge Banders for Advanced Production Processes FELDER G300 is an advanced B2B edge banding machine designed for the furniture industry, enabling precise banding of elements with thicknesses from 0.4 mm to 3.0 mm. It ensures professional finishing and production optimization. Key Technical Parameters and Functionality The FELDER G300 machine has been designed for maximum efficiency and versatility in modern woodworking shops and production facilities. It offers extensive processing capabilities thanks to advanced working units, ensuring a professional finish for furniture components. Edge thickness range: 0.4 mm to 3.0 mm. This allows for the use of a wide range of edging materials, from thin tapes to thicker PVC and ABS edgings, ensuring versatility in applications. Workpiece thickness range: 10 mm to 45 mm. This allows for processing standard furniture board thicknesses and structural elements of various dimensions. Saw unit: Responsible for precisely trimming the edging to the required length before glue application, eliminating the need for additional operations and streamlining the workflow. Trimming unit for removing edge excess: Enables uniform removal of excess edging or profiling it according to specific project requirements, ensuring an aesthetic and professional finish. Edge trimming function: Effectively removes excess edging material from the top and bottom surfaces of the workpiece, ensuring a clean and professional finish. Uniform trimming: Ensures consistent material removal along the entire length of the edge being processed, which is crucial for achieving a cohesive visual effect and high-quality finish. Angled or curved edge trimming: Allows for the realization of non-standard edge shapes, including chamfers and radii, within a single work cycle, significantly increasing the machine's versatility. Trimming unit parameters: Cutter diameter: Ø 70 mm Number of teeth: Z 6 Working angle: a=15° Rounding radius: R= 2 mm These technical parameters allow for precise, aesthetic, and repeatable edge profiles. Buffing unit: Responsible for the final finishing of the banded edge, giving it smoothness and high gloss, which enhances the aesthetic value of the finished product. Working table dimensions: 2000 x 300 mm. The generous working surface facilitates ergonomic placement and manipulation of elements of various sizes. Required air pressure: 6 Bar. Standard pneumatic pressure requirement, ensuring optimal operation of all pneumatic machine components. Power: 3.2 W. Low energy consumption while maintaining high operational efficiency, resulting in lower operating costs. Glue application system: Equipped with a precise glue roller and a dedicated glue tank, ensuring optimal and uniform glue distribution on the edge. Grooved glue roller: Ensures uniform application of glue to the edge surface of the workpiece, which is fundamental for achieving a durable and aesthetic bond. Feed speed: 9 m/min. Optimal working speed enabling efficient production while maintaining the highest quality finishing standards. Detailed Technical Specification Parameter Value Practical Significance Edge thickness 0.4 – 3.0 mm Enables work with a wide spectrum of edging materials, from thin tapes to thicker PVC and ABS edgings, ensuring flexibility in material selection. Workpiece thickness 10 – 45 mm Allows processing of standard furniture board thicknesses and structural elements of various dimensions, increasing application versatility. Feed speed 9 m/min Ensures efficient and fast production while maintaining high edge finishing quality, crucial for optimizing working time. Air pressure 6 Bar Standard requirement, ensuring correct and stable operation of the machine's pneumatic mechanisms, guaranteeing operational reliability. Power 3.2 W Low energy consumption, resulting in lower operating costs and less strain on the power grid, while maintaining high efficiency. Table dimensions 2000 x 300 mm Large working surface facilitates handling and positioning of elements of various sizes, improving work ergonomics. Frequently Asked Questions (FAQ) What types of edging materials can be used with the FELDER G300 machine? The FELDER G300 machine is designed to work with a wide range of edging materials, including PVC, ABS, laminates, and veneers, with thicknesses from 0.4 mm to 3.0 mm, ensuring great flexibility in the production process. Does the machine allow for processing edges with non-standard shapes? Yes, thanks to the trimming unit with the ability to trim at an angle or along a curve, the machine allows for the realization of non-standard edge profiles, such as chamfers or radii, in a single work cycle, which significantly increases its versatility. What is the significance of the buffing unit in the edge banding process? The buffing unit is used for the final finishing of the banded edge, giving it smoothness, gloss, and an aesthetic appearance. This is crucial for the visual and tactile quality of the final product, increasing its market value. Is the FELDER G300 machine suitable for mass production? Thanks to its high feed speed (9 m/min), precise working units, and integrated functions, the FELDER G300 machine is an efficient solution, perfectly suited for the effective mass production of furniture components, minimizing cycle time and maximizing throughput.